[. . . ] 158TS11760
7/27/04
3:49 PM
Page 1
MODEL: T105
LR3730
24 HOUR DIAL TIME SWITCH
ONE NORMALLY OPEN - ONE NORMALLY CLOSED CONTACTS
MAY BE WIRED AS SINGLE POLE DOUBLE THROW
40 AMP. [. . . ] To wire as SINGLE POLE DOUBLE THROW, install jumper (the same gauge as Line wire) between 2 and 3 and connect LINE to 2, LOADS to 1 and 4. Use 3/16 or larger screwdriver, tighten terminal screws firmly (25lb-in minimum). REPLACE INSULATOR BEFORE TURNING ON ELECTRICITY.
MINIMUM COPPER WIRE SIZE (AWG) MAX. 240 V.
PRESSURE PLATE TERMINAL SCREW MAKE SURE WIRE INSULATION CLEARS PRESSURE PLATE
14 12 10 8
15 20 30 40
60 60 60 75
1/2 1 2 -
2 2 1/2 3 5
N/A
N/A
PROGRAMMING INSTRUCTIONS 1. TO SET "ON" AND "OFF" TIMES: Hold trippers against edge of CLOCK-DIAL, pointing to time (AM or PM) when ON and OFF operations are desired, tighten tripper screws firmly. Turn in either direction and align the exact time-of-day on the CLOCKDIAL (the time now, when switch is being put into operation) to the pointer. [. . . ] See programming instructions.
INTERMATIC INCORPORATED
158TS11760 SPRING GROVE, ILLINOIS 60081-9698 [. . . ]